SiegerSnowGuard.com

Quick Jump to
our Snow Guard
Distributors here.

Did you know...
That Roofs with 30 Degrees or Greater slopes are more susceptible to snow and slush slides which can injure or damage property or visitors.

Worry no more about ice and snow sliding off your roof and injuring a passerby, ruining precious shubbery or clogging and perhaps even buckling rain gutters. When you are building that new home, plan protection ahead by installing famed Sieger Snow Guards on your roof. They can save you money and much grief in the long run.

Recognized by contractors and roofers as the strongest, safest protection against snow and ice damage, sturdy Sieger Snow Guards have prevented ice and snow slides on America's homes since 1906. Source of their great strength is the heavy guard strap (the part fastened to the roof), inserted through and crimped under great pressure to the guard plate.

RECOMMENDED FOR SLATE, SIS, 90# MINERAL AND ALL TYPES OF SHINGLES

The original Sieger Snow Guards -Model C, Boss, and Continuous Rod, have an exclusive design that gives the guard added strength. The guard strap, the part that is fastened to the roof, is inserted through the guard head and then crimped under great pressure.

This produces a bond so permanent even cleat ladders can be attached to them.

Find a Sieger Distributor Here!

Left to Right: Aluminum, Bronze, Galv. Iron

Model C Snow Guard:
Available in: Aluminum, Bronze, Galv. Iron

Left to Right: Bronze, Galv. Iron

Boss #1 & Boss #2 Snow Guard:
Available in: (Boss #1) Bronze, (Boss #2) Galv. Iron

Left to Right: Galv. Iron, Bronze, Aluminum

Continuous Rod Snow Guard:
Available in: Galv. Iron, Bronze, Aluminum
	This guard uses two or three pipes of 1/2 inch diameter or solid bars, which we DO NOT provide.

Left to Right: Aluminum, Bronze, Galv. Iron

Eagle Snow Guard:
Available in: Aluminum, Bronze, Galv. Iron
Our decorative American Eagle design adds style with function to accent building or structural appearance.

Left to Right: Aluminum, Bronze

Standing Seam Snow Guard:
Available in: Aluminum, Bronze
This guard fits up to a 3/16" wide seam and 1" high seam. And is "crimped" onto the seam, which means you dent the seam into the hole on the guard, you do not pierce the seam

Left to Right: Boss #3, MC #2, Eagle #2

Adhesive Snow Guards:
Available in: Aluminum, Bronze
These guards have a flat bottom and are applied by using silicone or polyurethane sealant with two mechanical fasteners in the holes provided.

Shown: MC #2N

Adhesive Snow Guards:
Available in: Aluminum
These guards have a flat bottom and are applied by using silicone or polyurethane sealant with two mechanical fasteners in the holes provided.

Sieger Snow Guards Inc.
P.O. Box 320
Leesport, PA 19533
Tel: (610) 916-0815
Fax: (610) 916-7582

Site Designed & Maintained by...